Canon Ij Setup SELPHY CP1300

Canon Ij Setup SELPHY CP1300

Canon Ij Setup SELPHY CP1300 – Presentation The Canon SELPHY CP1300 is another conservative photograph printer from Canon, which is the successor to the SELPHY CP1200.

It is equipped for delivering postcard measured prints (6×4 inches). Like the CP1200, it is remote, which means you can print from gadgets associated either to your home system, or to the printer straightforwardly. This incorporates PCs, your telephone and your camera.

In the container it accompanies a power supply link, however you can buy a battery independently so you can utilize it movably without being close to a power point.

Right now, the Canon SELPHY CP1300 retails for around £127/$130. Paper and ink packs for the printer cost around £27 for 108 prints.

Setting up and utilizing the Canon SELPHY CP1300 printer is exceptionally clear, and you can be prepared to go immediately without a doubt.

You can stack the ink tape in the side of the printer, behind an entryway which disguises it. It’s truly an instance of sliding it in, confronting the correct way – which ought to be sensibly clear since it won’t fit if it’s confronting the wrong way.

At the front of the printer, you’ll discover the space for the paper tape. This is marginally more confounded than the ink tape, yet sufficiently simple once you get its hang. There are two spreads which should be opened, and the paper set inside it. It can just hold 18 sheets at once – which is helpfully what number of are found in singular packs provided in the 108 sheet pack we were utilizing. The gleaming side of the paper should be embedded confronting upwards – once you’ve done that, close within cover, yet open the external one – this enables you to embed the tape into the applicable space in the front of the printer.

In case you’re utilizing the provided control link, you connect this to the back of the camera. Then again, join the battery pack – this is accessible to buy independently, and in that capacity, we were not given this to test. Once connected to, hold down the power catch on the highest point of the printer.

One of the changes from the CP1200 is the span of the LCD screen on the highest point of the printer, which like previously, can tilt advances to assist you with seeing it better. It is currently 3.2inches – contrasted and 2.7inches. Tragically, it’s still not contact delicate, so you’ll have to make utilization of the catches on the printer to move around the different menu alternatives.

With regards to printing from the Canon SELPHY CP1300, there’s a couple of various choices. There’s a SD card opening in the front of the printer, or a USB port as an afterthought, from which you can print specifically. This is awesome on the off chance that you simply need to make a fast print from your camera.

Once you’ve embedded a SD card, you’ll see the pictures from it showed on the screen. You can utilize the directional keys to travel through the diverse pictures on the card, choosing which ones to print, and changing any settings you wish to.

Then again, you can set it up as a remote printer. Likely the best alternative is to set it up so it’s associated with your home Wi-Fi organize, which will imply that you can print to it from a gadget which is additionally associated with a similar Wi-Fi arrange, for example, your PC, your telephone, or to be sure your camera. To set it up in this way, you’ll have to go to the Wi-Fi settings region, found under the Menu catch. You’ll be guided through the means you have to take after to set it up, which is quite simple and direct.

On the off chance that you incline toward, you can interface specifically to the Canon SELPHY CP1300 itself to print that way. This is helpful on the off chance that you don’t approach the Wi-Fi switch, or for instance in case you’re utilizing it while out on a shoot and simply need to print something from another gadget – this implies you needn’t bother with a switch or some other hardware to utilize it. The CP1300 is good with Apple AirPrint, so on the off chance that you have an iPhone, you can send a picture from it effortlessly to be imprinted on the CP1300.

Group says that postcard prints take around 43 seconds to print. In our tests, we found that altogether from squeezing the print catch on the telephone or PC, to having the picture completed, is a little more than a moment or so – this additional time might be because of the remote association requiring a significant stretch of time to exchange the information, and additionally paper taking care of. Printing specifically from a SD card is speedier – for the most part around 50 seconds (counting paper taking care of).

As we specified in our CP1200 survey, watching the printing procedure is very captivating. The printing procedure includes applying the shading in layers independently, implying that the paper will be drawn into the printer, at that point spat out once it’s connected the primary layer, being attracted again three more circumstances previously it’s concluded. You’ll have to guarantee there’s space behind the printer, as it moves forward and backward from the front to the back a few times. You’ll see the screen show which layer it’s printing, and once it’s prepared, the last picture will rest in the paper plate.

On the off chance that you have a memory card or USB stick embedded, you can print every one of the pictures in one go, or you can print more than one to a page – you can fit up to 8 on one page, which can be a good time for making a montage compose impact.

There’s additionally four diverse printing completes accessible, in addition to you can print with or without a fringe, switch picture streamlining on or off, change brilliance, hues, include skin smoothing, revise red-eye, include a date stamp, a record number et cetera. There’s likewise different alternatives accessible, for example, Auto Power Down, which can be particularly helpful in case you’re utilizing the printer with a battery.

Another component for the CP1300 is “Rearrange Print”. This essentially implies numerous cell phones can interface with the printer without a moment’s delay keeping in mind the end goal to print onto one sheet of paper – which a be a fun path for a family to print their shots.

We were provided with a consolidated ink and paper pack, which has 108 sheets inside it. At the season of composing, this was accessible to purchase for £26.73 from Amazon. This makes it around 25p for every print, barring the cost of purchasing the printer itself.

As we’ve noted previously, the print itself will include two strips on either side which can be organizer over and removed. This is to guarantee that the print goes the distance to the sides, however in the event that you essentially crease the strips and abandon them connected, you can utilize them as a make-move stand, which means the photograph will stand up on a level surface.

At the point when the paper has run out, you’ll obviously have the capacity to see that there’s none left in the tape, yet there will likewise be a notice message showed on the screen. With respect to the ink cartridge, there’s no real way to see when this is going to run out, however once more, there will be a notice showed to demonstrate to you when it has. It would maybe be useful on the off chance that it was shown on the screen the quantity of prints you have left in your present tape.

In general, the Canon CP1300 is a simple gadget to utilize, enabling you to begin straightaway, with additional alternatives accessible to investigate as and when you have to. provides the installer to use your devices with Canon Ij Setup SELPHY CP1300 the file is free from viruses and malware.

In case you need to build Connection Using WPS

  1. Please be sure that the access point button is ready to be excecuted.
  2. Please hold down for a couple second the Wi-Fi button (A) on the printer until the Alarm lamp (B) flashes once, at that point discharge the Wi-Fi button after the blaze.
    figure: Press and hold the Wi-Fi button and the Alarm lamp flashes once
  3. Ensure that the Wi-Fi lamp (C) flashes rapidly and the ON lamp (D) is lit, at that point press and hold the catch on the entrance point inside 2 minutes.
    figure: The Wi-Fi lamp flashes quickly and the ON lamp lights up
  4. Ensure that the Wi-Fi lamp and the ON lamp are lit.
    figure: The Wi-Fi lamp and the ON lamp lights up

    On the off chance that the Alarm lamp lights up, go to “Troubleshooting.”

Canon Ij Setup SELPHY CP1300 links/mirror

Driver for Windows all versions 32bit
Driver for Windows all versions 64bit

OS X 10.9,OS X 10.8
Mac OS X 10.6

Linux (RPM/DEB)